@axur-delmeria On my T14 There is no option for HDMI in my bios only Display; with, Boot Display, Boot Time ex. and video memory.

Thank you, I will check the bios tomorrow.

I’m having a problem getting video from the HDMI port on the dock to my Samsung M7 32” monitor. I have tried several different cables to no avail. It works if I use the port on the TP instead of the dock but then I only get HD res not UHD. I believe there is a known problem with USB-3 in this setup ...

Thanks Screamer I really appreciate the detailed reply. I don't think I will even bother with Speedfan then, because the M73 tiny is designed to handle up to an i7 processor.

HI can anyone tell me if the Thinkpad fan control software would work on a Thinkcentre M73 (tiny). It's not that it's running hot or anything, just that I want to upgrade the cpu then it could be useful.

Thank you for your replies guys. Now I'm in a real quandary as to what to do. @wujstefan the screen is actually very very good, just very difficult to photograph with an old iPhone. The images you see were just to show no dead pixels with Dead Pixel Buddy. I guess I will mull it over for a day or tw...

Hello all, I have a T60p that I want to sell (it's the one in my sig) and I have absolutely no idea of the value of it. Prices vary so much on eBay that I can't get a decent feel. So I thought I would ask the people who know. It really is in excellent condition, the best I have seen in a very long t...

Thankyou Iganas, I think I will be keeping Win 7 pro on my T60p now. I have decided that it just won't be with the hassle.

Thank you RBS for pointing me in the right direction. Looks like there's a bit of reading in my future.

Hi All, I really hope this is not a question that has been asked already. I have done a search and did not find anything so here goes:
Can I run Win 10 on my T60p that has an ATI graphics card. I don't mind having to "fiddle" with it if I have to

Well I said that I would let you know how my attempted repair went so here goes: I stripped it down and went to remove the fan, then realised that I did not have the copper shim that I had purchased and "put in a safe place until needed" I can't remember where I put it :( Senior Moment? So I just cl...

@ajkula66 and @theterminator93
Thank you for your help. I will have to leave it until the weekend but will post my results when completed.

theterminator93 wrote:
The .8mm copper shim was a tad on the thick side, if I did it again I'd look for a .5 or .6 mm shim. Pleased with the results overall though.

Did you leave the thermal pad in there as well?

If you're running the old Vista driver, you may want to take a look here: http://forum.thinkpads.com/viewtopic.php?f=29&t=118533 I'd re-seat the heatsink, check the condition of the thermal pad on the GPU and re-paste if needed... Good luck. Thanks for the info George, my T60p has the v5200 not the...

ajkula66 wrote:Which OS are you running?

Sorry for the omission it's Windows 7 pro.

I have a T60p (the one in my sig) I use TPFC and recently I noticed that my temps at idle were running quite high. CPU 80c and GPU 86c. So I did the obvious, cleaned out the fan and it helped a little but not a lot. The laptop then started to run quite slowly (not sure but I think it started after a...

Well it's taken a bit longer than I would have liked, but I'm up and running again and able to boot on the dock. However I am unable to run in ACPI mode. It's strange because when I loaded Win 7 the bios was set to ACPI mode but when finished it would not start unil I put it into compatibility mode....

@GBCrabill referred to this thread: http://forum.thinkpads.com/viewtopic.php?f=29&t=107788 and it seems to be a hit or miss thing. So I think that this weekend I will do a clean install of Win 7 and see how it goes. I will post my results. in that other thread, @RealBlackStuff said to check if there...

@GBCrabill sorry for the lack of info. Mine is a Intel X25-M SATA Solid State Drive - 160 GB. @craigmontHunter When you installed your SSD did you start with a clean install or a copy from previous drive? @Fixed_Rider same question, did you do a clean install or copy? If a clean install will resolve...

CeeDee, I'm tagging along for this one. You are not alone with this issue. Until now I thought I was crazy. I have an X61s with a Intel 120gb SSD dual booted between Win8 and Ubuntu 12.04 and I have the same issue regardless of which OS I boot into. If I cold boot while docked it hangs just past th...

Well I have been unable to find drivers for the dock. As its just the advanced mini dock I think that the ports are just pass through, drivers are not required. Please someone correct me if I am wrong. I did try starting the T60 off the dock and then dock it and everything worked fine but still unab...

Thank you for your reply. I will try reloading the dock driver tomorrow. It should be there though as I did a disk copy of my previous drive. But I suppose anything can get screwed up.
I will post my results.

I have just installed an Intel 160 gig SSD in my T60. I did a disk copy from my previous drive then ran the Intel toolbox and everything checked out great. There is a great speed improvement bu the problem is it will no longer boot on the dock, just sits there on the Thinkpad splash screen. If I swi...

I think the easiest (& cheapest) route will be a new DVI monitor. Thanks for your help.

So it looks like I can't use the DVI port with these monitors. Thanks for the reply by the way.
Do you think a VGA 'Y' splitter would give me all the functionality of dual monitors, or will it just be the same image on both screens?

I am trying to run dual monitors on a T60p in the mini dock. The monitors are identical 19" with VGA connections. I have one connected to the VGA connector on the dock and the other to the DVI connector via a DVI to VGA adaptor, however I can't get anything to display. I have tried different setting...

Looks like someone will get a bargain on my T2600 on eBay. Only $9.95 and no bids and no watchers!! Item number: 250889092650

You've got a PM

You got PM

I have a T2600 Core Duo chip from a T60p for sale FRU:41W1138 Perfect working order.
I would like $33.00 and I will include free basic shipping.