Warning - Access Conn. 4.41 - still doesn't switch profiles

Message

Wojtek · #1 Post by **Wojtek** » Sun Jun 24, 2007 3:37 pm

I have tried today upgrade to AccessConnections 4.41.
It still sucks and doesn't properly switch profiles between ethernet networks (R50e without wireless card).

Now I am using 3.82 again. This version just works without any problems.

#2 Post by **jdhurst** » Sun Jun 24, 2007 4:09 pm

4.41 switches between wired networks for me. Somewhat difficult to test because in most places I just have one wired network. But in one location, I have an internal network and an external network. If I unplug the internal and plug in the external, 4.41 changes smoothly. ... JDH

bill bolton · #3 Post by **bill bolton** » Sun Jun 24, 2007 9:19 pm

jdhurst wrote:4.41 switches between wired networks for me.

Its working fine for me too, on a T43.

Cheers,

Bill B.

Wojtek · #4 Post by **Wojtek** » Mon Jun 25, 2007 2:00 am

So, if you don't have any problems with that release, could you advice me what should I do?
Maybe should I remove all profiles before upgrade?

Regards

#5 Post by **jdhurst** » Mon Jun 25, 2007 5:08 am

You could try removing the profiles. I went from 3.71 (I think) to 4.12 and then through 3 more 4.x versions up to and including 4.41. The profiles survived that. But uninstalling Access Connections and all the profiles is worth a try. ... JDH

Deckard · #6 Post by **Deckard** » Sun Jul 01, 2007 2:50 pm

Speaking of 4.41, I was using 4.21 and installed 4.41 today.

Is the Receive Rate missing in the Wireless Connection Status window? (the one that pops up, when you double-click on the wireless status icon in the system tray).

The Receive Rate was showing on the 4.23, but not on the 4.41.

#7 Post by **jdhurst** » Sun Jul 01, 2007 3:02 pm

It seems to be working for me. I also upgrade the wireless NIC to version 4.1.2.156 that was new out in the last two weeks and it seems to be working fine as well. ... JDH

Deckard · #8 Post by **Deckard** » Sun Jul 01, 2007 3:40 pm

Thanks for the quick reply, JD.

I have uninstalled and re-installed Access Connections, but the Receive Rate is still missing.

Here's a screenshot of the window

http://img329.imageshack.us/img329/5461/wirelessdh6.jpg

As you can see, I have also updated the NIC driver.

Weird.

#9 Post by **jdhurst** » Sun Jul 01, 2007 3:56 pm

Thanks for posting that. My screen looks the same as yours. So if something was on that screen prior to AC V4.41, then I have forgotten. So there must be a difference somewhere affecting both of us. Otherwise all is well. ... JDH

bill bolton · #10 Post by **bill bolton** » Sun Jul 01, 2007 7:50 pm

Deckard wrote:The Receive Rate was showing on the 4.23, but not on the 4.41.

I can only ever remember seeing a single wireless data rate displayed on that panel with any version of AC I have used to date! I don't recall whether it was a Tx or Rx rate, but there was only one rate.

Cheers,

Bill B.

Paul Unger · #11 Post by **Paul Unger** » Mon Jul 02, 2007 2:03 pm

I think he means something like this: http://img114.imageshack.us/img114/3171 ... atuds9.jpg

That's with AC 4.23. And no, I haven't updated the NIC driver.

Deckard · #12 Post by **Deckard** » Tue Jul 03, 2007 5:27 am

Paul, thanks for posting that!

Yes, that's exactly what I meant. The "Receive Rate" is not present in the 4.41.

Good to know that it's still there in 4.23. I might go back to that version, since I couldn't notice any difference with the 4.41

Cheers

Warning - Access Conn. 4.41 - still doesn't switch profiles

Warning - Access Conn. 4.41 - still doesn't switch profiles

Who is online