Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
W541 FrankenPad not booting, lost, please help (updated) *WARNING: PICS*)
W541 FrankenPad not booting, lost, please help (updated) *WARNING: PICS*)
Hi,
I'm trying to piece together the bits required for a W541. I just got a fan with the 6-pin connector and the wider heat sink areas for the K2100M on the apparently working board I bought.
It turns on when the PSU is connected (apparently a BIOS setting), fan starts and turns off, apparently correct as it turns back on after it's heated up. At least the fan works. Does this mean the CPU works?
I get nothing on screen, had to buy a new EDP cable as the one it came with was snapped in two. The EDP was bought as "tested." They also said the LCD worked, it's an innolux n156hge-ea2 rev.c1 with a W541 bezel.
I get no beeps from the speakers. LCD is black.
Nothing is output to either VGA nor DP/Thunderbolt (DP cable), with or without the LCD attached.
I've sprayed contact cleaner on the EDP cable connectors, the lcd connector, the EDP connector on the motherboard, the ram slots and the ram. Same issue.
The thing is, I get exactly the same from a different board/fan which was bought in a lot as "untested," was bought cheap and for any other bits, i.e. chassis. This one has a K1100M GPU.
I'm also getting no power through any USB port on the K2100M board.
I'm at a loss. I could do with someone nearby who can test some things for me.
Any advice?
I'm trying to piece together the bits required for a W541. I just got a fan with the 6-pin connector and the wider heat sink areas for the K2100M on the apparently working board I bought.
It turns on when the PSU is connected (apparently a BIOS setting), fan starts and turns off, apparently correct as it turns back on after it's heated up. At least the fan works. Does this mean the CPU works?
I get nothing on screen, had to buy a new EDP cable as the one it came with was snapped in two. The EDP was bought as "tested." They also said the LCD worked, it's an innolux n156hge-ea2 rev.c1 with a W541 bezel.
I get no beeps from the speakers. LCD is black.
Nothing is output to either VGA nor DP/Thunderbolt (DP cable), with or without the LCD attached.
I've sprayed contact cleaner on the EDP cable connectors, the lcd connector, the EDP connector on the motherboard, the ram slots and the ram. Same issue.
The thing is, I get exactly the same from a different board/fan which was bought in a lot as "untested," was bought cheap and for any other bits, i.e. chassis. This one has a K1100M GPU.
I'm also getting no power through any USB port on the K2100M board.
I'm at a loss. I could do with someone nearby who can test some things for me.
Any advice?
Last edited by Lucretia on Thu Dec 09, 2021 9:56 am, edited 1 time in total.
New T42 owner
-
RealBlackStuff
- Admin Emeritus
- Posts: 24730
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: W541 FrankenPad not booting, lost, please help (updated)
Is your charger powerful enough?
20V/90W won't do.
W541 needs minimum 20V/135W, with K2100M GPU even 20V/170W.
20V/90W won't do.
W541 needs minimum 20V/135W, with K2100M GPU even 20V/170W.
Lovely day for a Guinness! (The Real Black Stuff)
But I actually prefer Murphy's from Cork!
But I actually prefer Murphy's from Cork!
Re: W541 FrankenPad not booting, lost, please help (updated)
The charger is 45N0558, doesn't look like a fake, but it was cheap from fb marketplace.
https://gcdn.pbrd.co/images/ZXn6ZDG1u6PT.jpg?o=1
https://gcdn.pbrd.co/images/hYAJHUpyPawX.jpg?o=1
The people who supplied the motherboard and CPU are adamant they work.
FORUM warning:
picture(s) WAY too big, tags removed. Please read the Forum Rules, especially Section 5: viewtopic.php?f=16&t=14339
https://gcdn.pbrd.co/images/ZXn6ZDG1u6PT.jpg?o=1
https://gcdn.pbrd.co/images/hYAJHUpyPawX.jpg?o=1
The people who supplied the motherboard and CPU are adamant they work.
FORUM warning:
picture(s) WAY too big, tags removed. Please read the Forum Rules, especially Section 5: viewtopic.php?f=16&t=14339
New T42 owner
Re: W541 FrankenPad not booting, lost, please help (updated)
I've checked the charger and it is giving 20V, don't know about Ampere's yet though.
New T42 owner
-
RealBlackStuff
- Admin Emeritus
- Posts: 24730
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: W541 FrankenPad not booting, lost, please help (updated) *WARNING: PICS*)
From the pictures, the charger is 170W and seems OK.
Things to check/try:
- speakers connected (if not OK, try external speaker/headphone)
- boot with all HDD/SSD/CD/DVD/wifi-card removed
- remove all RAM, at boot it should beep 1-3-3-1 if any life left in mobo
- another CPU
- swapping keyboards
- disconnect LCD-cable from mobo, connect external monitor
Things to check/try:
- speakers connected (if not OK, try external speaker/headphone)
- boot with all HDD/SSD/CD/DVD/wifi-card removed
- remove all RAM, at boot it should beep 1-3-3-1 if any life left in mobo
- another CPU
- swapping keyboards
- disconnect LCD-cable from mobo, connect external monitor
Lovely day for a Guinness! (The Real Black Stuff)
But I actually prefer Murphy's from Cork!
But I actually prefer Murphy's from Cork!
Re: W541 FrankenPad not booting, lost, please help (updated) *WARNING: PICS*)
Like I've said already, they are connected and I've tried headphones.RealBlackStuff wrote: ↑Fri Dec 10, 2021 1:31 amFrom the pictures, the charger is 170W and seems OK.
Things to check/try:
- speakers connected (if not OK, try external speaker/headphone)
There is no HDD/DVD and the wifi card is removed.
Again, already said I've tried with and without ram.RealBlackStuff wrote: ↑Fri Dec 10, 2021 1:31 am- remove all RAM, at boot it should beep 1-3-3-1 if any life left in mobo
Waiting on an i3.
There isn't one.
Already said, I get nothing with or without the LCD.RealBlackStuff wrote: ↑Fri Dec 10, 2021 1:31 am- disconnect LCD-cable from mobo, connect external monitor
New T42 owner
-
- Similar Topics
- Replies
- Views
- Last post
-
-
T420 Lid Sensor Trigger Location? (WARNING: PICS)
by T_B » Fri Jan 16, 2026 11:08 pm » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 2 Replies
- 7037 Views
-
Last post by T_B
Mon Jan 19, 2026 11:24 pm
-
-
-
ThinkPad 25 replica build log *WARNING: PICS*
by hidde-j » Tue Mar 24, 2026 4:20 pm » in Thinkpad T25 Anniversary/Retro - 3 Replies
- 3045 Views
-
Last post by hidde-j
Thu Mar 26, 2026 4:49 pm
-
-
-
FS: NOS Frankenpad T61p motherboard 44c3926 NEW 2011 date NVIDIA fx570m fits 14.1 and 15 4:3 t60, t61
by andre#4 » Fri Feb 06, 2026 1:58 pm » in Marketplace - Forum Members only - 1 Replies
- 4531 Views
-
Last post by andre#4
Mon Feb 09, 2026 9:34 pm
-
-
-
Starting to build a T60/T61/T601 Frankenpad
by stryker86 » Wed Feb 18, 2026 5:31 am » in ThinkPad T60/T61 Series - 8 Replies
- 6668 Views
-
Last post by stryker86
Sun Feb 22, 2026 12:10 pm
-
Who is online
Users browsing this forum: No registered users and 33 guests



