Which external display are you using with your ThinkPad?

[rootinit]

I have really been enjoying my ThinkVision P44w-10 43.4" display, and wanted to know if anyone else had one, or if not what you are using instead.

[axur-delmeria]

Second-hand Eizo MX220W: 22 inch 1920x1200 VA LCD.

[zemlin]

I have a pair of BENQ SW271 4K wide gamut hardware calibrated screens running through a Thunderbolt 3 dock (Displayport)

[axur-delmeria]

I have a pair of BENQ SW271 4K wide gamut hardware calibrated screens running through a Thunderbolt 3 dock (Displayport)

What color calibrator do you use? Got a ColorHug2 but the resulting ICC profile is a bit reddish.

[zemlin]

What color calibrator do you use? Got a ColorHug2 but the resulting ICC profile is a bit reddish.

I have the X-rite i1 Display Pro. I use that with Benq's Palette Master Element calibration software. I use the X-Rite software with the same colorimeter to calibrate the Laptop screen. I have to close out any X-rite software running when I start up the Benq program or there's conflicts with them both trying to access the sensor. I don't see the ColorHug on the list of supported sensors. It's only X-rite and Spyder devices.

[axur-delmeria]

I have the X-rite i1 Display Pro. I use that with Benq's Palette Master Element calibration software. I use the X-Rite software with the same colorimeter to calibrate the Laptop screen. I have to close out any X-rite software running when I start up the Benq program or there's conflicts with them both trying to access the sensor. I don't see the ColorHug on the list of supported sensors. It's only X-rite and Spyder devices.

The ColorHug is a colorimeter created by open-source developer Richard Hughes. It's supported in Linux via Gnome and Argyll CMS.
The ICC profile created by those programs are compatible with Windows.

https://blogs.gnome.org/hughsie/2011/11 ... lorimeter/

https://www.unfinishedman.com/colorhug- ... lorimeter/

[dr_st]

Most of the time it is either a single or two 24" WUXGA (1920x1200) displays. I have an older desk setup with a 22" WSXGA+ (1680x1050) LCD which I want to upgrade soon. The idea is to replace the 22" with the 24" and the 24" with a 27" QHD (2560x1440) screen. All the displays are IPS, by the way.

[chomik]

I use a Lenovo G24-10 FHD TN 144hz display with my P50 in docking station. Color quality is good, contrast is way better than like T420 900p screen.

[wolfman]

27 inch Dell S2721DGF.

[Puppy]

Viewsonic VP2768A-4K, 27" 4K UHD Pantone Validated. But I no longer use a ThinkPad