Hydis HV150UX2-100 screen in a T60 15" problems

[stryker86]

Hello,

I have a Hydis HV150UX2-100 screen with the modified cable and inverter but I have a problem when trying to put it in the case of a 15" T60.
The Hydis screen is thicker than the original T60 screen and for this reason the lateral mounting screw holes do not all allign, just 2/6 do, the problem beeing that because of the thickness the bezels with the mounting holes do not reach the case mounting holes, they just cant go down enough.
The holes that I can put screws in are not enough to keep the panel firm so I wont risk that.
I put the screen in a R60 screen case and the holes align perfectly because the screen case is larger.
Now I have another problem because I want to use this screen in my t601 frankenpad.
So my questions are:
1. How can I put the screen in a T60 screen case without risk of of an unstable screen or the screen touching the keyboard when I close it?
2. The second option is to try to put a T61 14" board in the R60 15" chasis and use it like this. I tried to put the T60 screen bezels and hinges in the R60 screen chasis but they are not compatible. Too bad.
If I go the R60 route or even the T60 route I still have a problem with the screen cable as it is longer that the stock cable and when I try to close the lid it makes a huch that I am afraid that in time will damage it. I will atach some photos.
https://imgur.com/a/4hfTAdD
If you have any ideeas about this situation please post it.

Thank you for your time.